Products Categories
Contact Us
Mr. Lee (13802618519)
Ms. Tan (13356426611)
0750-6103900
0750-6103909
xhtonghuajx@163.com
Dongjia Village,Xinhui Distinguish,Jiangmen City,Guangdong Province of China
http://www.tonghuajx.com
Search
Machine for Double-sides-milling Key-mouths is an advanced device of which our factory owns its independent intellectual property right. This device is used for milling the mouth of a computer-key after milling its key-groove. It has the following characteristics:
1. High efficiency. There are two lathe-heads, which allow the machine to process both sides of a key-mouth or to chamfer the mouth of a one-side-key at the same time.
2. High stabilization and simple operation. There is an LCD controlling system inside, which allows us to program for adjustment.
3. High automatization. After installing an alternative vibrating disk, a worker can take charge of 3 to 4 machines at the same time.
4. Wide utilization. By changing fixtures, the machine can apply to computer-keys in various forms.
Main technical parameters:
1. Working efficiency: 15~16 keys per minute for one-side-keys; 10~12 keys per minute for double-sides-keys
2. Geometric tolerance of products: ±0.10mm
3. Rotation rate of the principal shaft: 2500r/min
4. Motor of the principal shaft: 0.55kW , or 0.37kW X2.
5. External size: Length 1000mm, Width 800mm, Height 800mm.
6. Pressure of the source of the compressed air: 4kg/cm².
Previous: New hydraulic machine for double-sides-milling I-shaped-keys
Next: Automatic Machine For Deburring of cylinders